LJ-933单机式模块化胶水烘干机

名称

Designation

内容说明

Content Description

1、

单机组模式

将流水线分解成独立机台，机台体积小，易于流程变换，为多样少量化生产量身订造。

Single Unit Mode

The assembok ine is broken down into sole machines.the smalsize of each machine can easly be re-aranged for diferent production processes and thusit ould be customizedfor a variety of small-quantity productions.

2、

模块化串联

机台设备采用水平进出，机内回转式移动架设计。可与其他机台进行串联，极简操作即可进行链式拼接。

Serial Modular Setup

A rotany moving frame with a flat access platform is designed for each machine. Such machines can be senaly connected to each other within minimaistic operations.

3、

单边进出口

出入口均在单侧，利于传递和取放，可有效降低劳动强度，强化目视管理。

Single-Side Inlet and Outlet

Inlet and outet are set on the same side which are beneficial for transfering and stoning, labor intensity is efectively reduced, and visual monitoring is strengthened.

4、

U型设计

在精简机台体积的同时,提供超过机台长度2倍的轨道长度。双倍的加热效果保证了足够的定型效果和拉力。

U-shaped Design

The sze ofthe machine is desioed to be more compacted and compied wih a trackwhose length is twice longer than the lenoth ofthe machine Douple heaing caoaciesensure qood setting effect and tension.

5、

空气净化系统

本机采用集中式设计理念 ， 使废气经过活性炭空气净化系统过滤后再排放 ，空气净化程度高 ，保障生产人员呼吸健康 。

Air Purification System

This machine folows a centalzed desion.in which the exaust gas frst goes throuoh an activated-caron air purifcaltion svstem and gets fitered before being dischared.Thibrings a high degree of air purification to protect the respiratory health of the production personnel.

6、

极致节能

由于内部体积大幅减小，使机台内部保温效果极佳，能迅速达到设定温度。上下层独立控温，为客户节省每一度电!

Ultimate Energy Saving

The interal volume is greatly reduced, which makes an optimal temperature for and the temperature seting can be reached to the requirement. There are independenttemperature controls for both upper and lower sections, and thus the svstem is very eneray efficient.